Connexion Developments one of the UK's leading suppliers of solenoid valves

Solenoid Valve For Vacuum or Low pressure applications such as header tank pressures or closed loop systems with little or no differential pressure across the valve we use a "Zero Rated" solenoid valve. These will work with zero or little pressure differential. There are two main types of Zero Rated solenoid valves "Direct" and "Assisted".

An "Assisted" Solenoid Valve has an attachment from the armature that mechanically lifts the diaphragm/piston off its seat thus causing the valve to open even if there is no or little pressure from the media. Good for Zero to Medium Pressures with good flow capabilities.

A "Direct" Solenoid Valve uses the armature directly over the valve seat as the mechanical means to Directly open and close the valve regardless of the media pressure. Good for High Pressures with Lower flow capabilities.

A Solenoid Valve for high pressure or vent to atmosphere applications can use a "Servo Assisted" or "Pilot Operated" Solenoid Valve sometimes called a "Diaphragm" valve.

A "Servo Assisted" or "Pilot Operated" Solenoid Valve uses the pressure difference across the solenoid valve (Difference In Pressure from the inlet to the outlet ports) to do the mechanical work of lifting the diaphragm/piston to open the valve. This is achieved by controlling the pressure above the diaphragm/ piston via a pilot system that can release this pressure through to the outlet port of the valve down stream. The inlet pressure can then overcome the now reduced pressure above the piston/ diaphragm forcing it to lift open allowing flow and vice versa.

Most valves of this design require between 0.1 and 2 bar pressure difference to operate correctly, normally about 10% of the working pressure.

Choice of valve size is of paramount importance in achieving the correct pressure differential as too much or too little could adversely affect the operating function of the valve.

Please call us for help and assistance it is completely free of charge.

Call FREE today on 0800 808 7799 - your order will be with you tomorrow

International T: +44117 9415814 (Standard call charges apply)

All our Solenoid Valves for process control and other applications come with the relevant approvals and certificates. Work out flow rates and pressure drops by clicking here

Connexion Developments are exclusive Solenoid Valve Distributors and UK importers for Shako Fluid Power Ltd, CS Fluid Power Ltd., Z-Tide and ERA-SIB. If you need a valve for a special application make Connexion Developments your first choice: if we can't find the answer straight away then we will find one.

ŠCopyright (2008) whole or partial reproduction of this website and or contents without written consent is strictly prohibited.