graphic design header

 

Solenoid Valves UK News

Solenoid Valves UK Ltd and Connexion Developments Ltd are leading suppliers and stockists of solenoid valves, pressure reducing valves, pressure sustaining valves, pressure relief valves, angle seat piston valves, FRL Air Treatment Equipment, Y Strainers Filters from key manufacturers from around the world. This page is designed to give a brief list of new solenoid valves, solenoid valve options, developments and solenoid valve coils and connectors held in UK stock or readily available for supply.   

        

17. Coax Valves

Coax Solenoid and Pneumatic Valves 0 to 400 Bar RatedCoax Solenoid and Pneumatic Valves.

The coax series 2/2 and 3/2 way coaxial direct acting solenoid and external pneumatic pilot valves are available from G1/4 to G2 thread of flange ports and is designed to cope with aggressive contaminated viscous fluids up to 400 Bar. This new Coaxial solenoid and Air valves compliments the already extensive range of coaxial and solenoid control valves already available. 

 

Solenoid Valves UKAS 9001:2008 Quality Accreditation

Solenoid Valves (UK) Ltd BS EN ISO9001 UKAS Quality Assurance.

Remember, being assessed by an accredited organisation is important. It helps your company reduce risks, increase its opportunities and gain more commercial value than using a non-accredited body. Accreditation proves that the certification body has the necessary professionalism and expertise to conduct assessments and gives additional purchaser confidence. For this reason, accredited certification holds greater commercial value and integrity than non-accredited approval. We have been examined and approved by each accreditation council to assess companies in specific industry sectors. It shows we have the necessary professionalism and expertise to carry out assessments, which gives you more confidence. Remember without the UKAS Crown and Tick the 9001 is not monitored or checked by any UKAS certified body and is generally regarded accordingly. Worthless. Full UKAS (with tick and crown) BS EN ISO9001:2008 certificate

Download the publication document here.
 

14. New High Pressure PU225X Solenoid Valve

Shako PU225X High Pressure Solenoid Valve.

We are delighted to announce that Shako have launched the PU225X Series 0.5 to 50 Bar Rated Solenoid Valve. Sizes are available 3/8, 1/2, 3/4 and 1" BSP or NPT all with PTFE seals as standard, with factory test pressure at 75 Bar on all valves before despatch with any voltage from 12Volt DC to 415 Volt AC. Offering a high quality product at such a competitive price available from stock handling any pressure differential 0.5 to 50 Bar and being 100% ED Rated. Currently only available in Brass however stainless steel option should be available soon. read more here.

 

13. New High Pressure SAH Solenoid Valve

SAH Series High Pressure Piston Solenoid Valve

The Connexion solenoid valve SAH features a piston with PTFE seals instead of an elastomer diaphragm seal offering a maximum operating pressure of 40 bar. This offers a perfect universal process valve for water, air and neutral media. Bottling on Secondary circuit, irrigation, well engineering, sanitary engineering, water treatment, mixing plants, pipeline construction, and pneumatic automation systems are ideal choices for the process valve. 

The use of a sealing piston instead of a diaphragm means that even high pressures up to 80 Bar (SAHH Series solenoid valve) and 120 Bar (SAHHH series solenoid valve) can be controlled with a large full bore nominal diameter. The valve is failsafe closed (closes automatically if power is lost).
The valve can be operated wherever there is a pressure difference in excess of 0.5 Bar between the valve input and output. This includes applications where the medium is expelled into atmosphere (open air) or flows into an unpressurised container downstream of the valves. The SAH solenoid valve is used for gaseous and liquid material flows up to a viscosity of maximum 50 CST in factory and process automation.

The SA Solenoid Valve are 2/2-way valves, normally closed and are piloted piston valves. Units are made of brass valves and customers have a choice of 316 stainless steel valves with robust PTFE seals. The valves come with either BSP or NPT threads. Units should preferably be mounted with the coil upright. Sizes range from 3/8 to 2 inch. Operating pressure is from 0.5-40 bar, 0.5 to 80 Bar and 0.5 to 120 Bar. Process valve nominal pressure is PN 40, PN 80 and PN120. Differential pressure is minimum 0.5 Bar.

Read more athigh pressure solenoid valves.

 

12. Pneumatic Angle Seat Pneumatic Piston Valves sizes 3/8 to 3

All 316 stainless steel high Temp angle seat piston valve from ConnexionPneumatic Angle Seat Piston Globe Valve series.

This all NEW ALL stainless steel body and actuator Pneumatic Angle Seat Piston Valve with PTFE seats and seals suitable for all General Purpose, Aggressive and Contaminated Media and 200C Steam to 16 Bar. This all Stainless steel Angle Seat Piston valve has an all 316 stainless steel body and internal structure with a 304 stainless steel pneumatic actuator head and is available from 3/8 to 3" BSP from Stock giving the industries most rugged reliable cost effective compact angle seat valve solution suitable for most applications supported by strong UK Stock. With a water Hammer Free design and specially machined internal parts with virgin PTFE seals offering long reliable trouble free reliable sealing capabilities. The 304 stainless steel robust actuator seals are FKM as standard which are ideally suited for air or water actuation and offer the best resistance to heat further extending valve life.  Pneumatic Angle Seat Piston Valve in Stock sizes include 3/8BSP, 1/2 BSP, 3/4 BSP,1 BSP,11/4BSP,11/2 BSP, 2" BSP, 21/2 BSP and 3" BSP. Pressures range Vacuum to 16 Bar, Temperatures to +200 Centigrade Click here for data sheet.

 

11. Latching Solenoid Valves

Latching Bi-stable solenoid valves.

We now offer a full range of latching or bi-stable standard and miniature direct acting and pressure / servo assisted solenoid valves in both Brass, Stainless Steel and Plastic across all port sizes from 1/8 to 2" thread or DN15 to DN50 flange for Pressures from 0 - 105 Bar with UL and CE approval. Voltages available are 12vDC or 24vDC IP68 or ATEX EexmIIT4 coils. We can offer a full range of solenoid valve sealing options from NBR, EPDM,FKM,Silicone, FFKM and high temperature VST seals suitable for 185C steam!! Click here for our latching solenoid valve selection.

 

10. EN161 Class 2 Manual Reset Gas Solenoid Valves Sizes 1/2-DN300

EN161 Class 2 Manual Reset Gas Valves 1/2-DN200EVRMNCA EN161 Manual Reset Gas solenoid valve.

EVRMNCA series EN161 Gas Board approved Class 2 Manual Reset Gas solenoid valve series with Stock sizes range from 1/2,3/4,1,11/4,11/2,2" BSP and DN65,DN80,DN100,DN125,DN150 and DN200 PN16 flange. Working closely with our suppliers with a proven track record of success these gas EN161 solenoid valves are now available from stock in 230vAC (Other voltages are from the factory in Italy) for next day delivery. Emergency knock off buttons, position switches and 1/8 or 1/4 BSP pressure test ports. Click here to see our full range

 

 

7. NOPK Delrin 2/2 Normally Open 0 - 5Bar Delrin Solenoid Valve

NOPK series 0-5 Bar 2/2 Way Normally Open Delrin solenoid valve.

The NOPK normally open direct acting plastic solenoid valve are ideal for low pressure, gravity fed and closed loop systems for slightly aggressive applications especially suitable for Demin water, Pure water for Reverse Osmosis Systems where no Brass or Copper can be present anywhere within the valve. Stock sizes range from 1/2,3/4 and 1" BSP or NPT complimenting the existing stock range of PK Normally Closed Delrin Valves. All voltage options are available from stock. Please click here to see the NOPK Solenoid Valve range.

 

5. Permanent Magnets to for Engineers to replace Solenoid Valve Coils

Permanent MagnetSolenoid Valve Perminant magnets.

Solenoid valve magnets are designed to convert electrically operated solenoid valves into hand-operated valves to enable service engineers to operate valves manually. This solenoid valve operating magnet is a great assist for engineers during valve installation, recovery of refrigerants, commissioning and decommissioning of all plant and machinery with solenoid valves, allowing engineers to actuated almost any solenoid valve without the need for electrical power supply. The MAGNET series is a must have for all qualified technical engineers. See them here.

 

6. SAPS Series Miniature High Pressure Stainless Solenoid Valve 1-100Bar

SAPS Miniature High Pressure Stainless steel Solenoid Valve.

This 316 Stainless steel miniature high pressure high flow solenoid valve offers a compact robust design with very high flow rates for its size. With a nominal diameter (Orifice) of 5.0mm and port Sizes ranging from 1/8, 1/4 and 3/8 BSP or NPT, this well designed robust little solenoid valve is designed to handle high pressures up to 100 Bar with the best media flow rate in the industry. As standard fitment from stock with UL Approved IP68 coil and LED IP65 connector as standard. These valves are held in stock ready for next day delivery as standard. See the SAPS miniature solenoid valve here.

 

4. Brass and stainless Steel solenoid valves with Manual Over Ride

Zero rated solenoid valves with Manual Over Ride.

Direct acting brass and stainless steel solenoid valves from 1/8 to 2" thread available manual override facility are are now available for the AD Brass series and ADS Stainless Steel series 2/2 Normally Closed solenoid valves. This allows users to manually over ride the solenoid valve to open position and port sizes available from 1/8, 1/4, 3/8,1/2,3/4,1,11/4,11/2 and to 2" BSP, NPT or flanged. Pressures range from 0-10 Bar with ATEX EExmIIT4 options available. A full range of sealing materials also available including NBR, EPDM, FKM, PTFE, FFKM and high temperature VST seals for steam up to 200 centigrade. Click to see the solenoid valve here.

 

3. SAP Series Brass Miniature High Pressure Solenoid Valve 1-100Bar

High Pressure High Flow Miniature Brass Solenoid Valves

SAP series miniature high pressure Brass 2/2 Normally Closed solenoid valve with 5.0 mm high flow orifice and working pressure from 1 to 100Bar complete with UL CE and IP65 coil. This valve is available quickly and very competitively and is probably the best value small high pressure solenoid valve in the market today. Sizes 1/8, 1/4 and 3/8 BSP or NPT" Click here to see them.

 

15. Shako PU225H High Pressure Diaphragm Solenoid Valve

Shako PU225H High Pressure Diaphragm Solenoid Valve

Shako PU225H High Pressure 2/2 way normally closed and normally open diaphragm solenoid valve rated from 0.5 to 25 Bar. This revolutionary design utilises a Nylon reinforced Elastomer NBR, EPDM or FKM diaphragm to reduce high pressure hammer affect normally associated with piston type high pressure solenoid valves. Stock Sizes range from 3/8,1/2,3/4 and to 1" BSP or optional NPT in most voltages ready for next day delivery. Shako PU225H high pressure solenoid valves here.

 

16. Connexion Developments ltd (Solenoid Valves UK Ltd) have moved to huge new premises

Connexion Developments Ltd + Solenoid Valves (UK) Ltd buy new Office.

February 2010 Solenoid Valve UK Sales growth and Solenoid valve UK stock exceeds our current space limitation so we have to move to larger premises and leave our old rented accomodation in central Bristol UK now Solenoid Valves UK have purchased a large 2 storey industrial units based at Rainbow Court, Armstrong Way, Yate, Bristol BS37 5NG, England.

Free Phone: 0800 808 7799 Int: +44 1454 334990 Fax: 0800 808 7700 Int: +44 1454 326390 

 

1. Shako PU220 Brass Solenoid Valves with Nass Magnet High Power Coil

Shako Solenoid Valves 100% fitted with Nass Magnet Solenoid Valve Coils as standard.

Shako solenoid valve series PU220 Hung Diaphragm (assisted lift) solenoid valve range now 100% fitted with the world leading Nass Magnet System 13 15 Watt and optional 18.5 Watt high power coil. The Nass Magnet high power has proved to increase the Shako solenoid valve working pressures from the original 8.5 bar to 16 Bar across the range from 3/8, 1/2,3/4, and 1" Ports. With stock of all voltages with either 15 Watt and 18.5 Watt coils, Shako solenoid valves can be delivered straight from stock.

 

Connexion Developments constantly improving to exceed your expectations.

 

Media
Port Size - Type
Port Option
N-open/closed
Min Pressure
Max Pressure
Body Material
Protection
Special Option

click
to
search

 

Full 150 Page Priced Solenoid Valve Catalogue Click here for Index to all Connexion Solenoid Valves 2003 - Connexion First 60 Page Solenoid Valve Catalogue

 
Solenoid Valves phone
Solenoid Valves 12v ATEX high pressure Solenoid valves uk Design Solenoid Valves brass plastic stainless steel