‧ The flow-directing mechanism, in the valve, has
a unique flow-guiding and pressure-stabilizing function.
‧In the corners of pipe installation, the water hammer is t he most obvious. The design is for meeting the requirement
and set the arrestor at the corner directly at the hammer point. This design not only saves the space and is easy to set up, also
replaces the traditional elbow to reduce the
cost of setting up.
‧Connexion L style has the double way water-hammer-absorbing characteristics with excellent results. ‧The test pressure of valve body
Bronze : 12 kgf/cm2
cast iron: 21kgf/cm2
stainless steel : 35kgf/cm2
‧The applied conditions : normal fresh fluid
‧Applied temperature:-15 ℃～80 ℃
‧If the diameter is large than 2", stainless
steel valve is available.
‧If the fluid is acid/base or oil, the air bag
made of special material should be applied. | 
