Solenoid coils, bobbins and electro magnets below will fit most Shako solenoid valves, CS Fluid Power solenoid valves, ERA-SIB solenoid valves, Sunwell solenoid valves, Queen solenoid valves, Pro-Uni-D and Nass Magnet solenoid valves and many other manufacturers utilising these industry leading solenoid valve DIN 43650A and 43650B IP65, IP67, IP68 and IP54 and ATEX coils.
The coils shown include Class F (155C),Class H (180C) and Class N (200C) Rated CE Approved solenoid valve coils from standard safe area to ATEX Hazardous Area EExmIIT4 from UK stock in all voltages 12v AC 50/60Hz, 24v AC 50/60Hz,48v AC 50/60hz, 110v AC 50/60hz, 220v AC 50/60hz, 230v AC 50/60 hz, 240v AC 50/60 hz, 380v AC 50/60 hz, 380vAC, 415v 50/60hz and also 12vdc,24vdc,48vdc,110vdc and 220vdc, 230vdc and 240vdc.
Below are complete specification & size data in 'pdf' format for specific valve pilot diameters
It may be that these solenoid coils can be used on another manufacturers valves however we would recommend that you contact us first to help avoid any potential problems.
Most coils are IP65 rated - but for the majority of coils this applies only to the connection between the DIN connector and the coil electrical terminals. If you require complete IP65 protection for damp/ moist environments we recommend that the coil is isolated & removed and some suitable sealant (silicone sealant is fine) is used at the top and bottom of the core tube to help prevent water ingress.