| ||||||||||||||||||
 | ||||||||||||||||||
 |
 Connexion Multi Function Cylindrical Auto Control Valves. Connexion unique Patented design offers exceptionally high flow compact cyclindrical valve body design common across the range of Float Valves, Pressure Reducing Valves, Pressure Relief Valves, Pressure Sustaining Valves and Solenoid Control Valves or any combination thereof. Each specific pilot control unit is mounted externally of the main cylindrical valve body and can be quickly installed or removed for easy, safe and damage resistant transport,handling and installation. Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request. Body Materials Cast Iron, Epoxy Coated Ductile Iron, 316 Stainless Steel and Bronze. Connexion Float Control Valve regulates mechanically water in a tank by means of a 2 position float valve. Float valve closes at a preset high water level, opens at a given low water level.Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request.  Connexion Pressure Reducing Valve Controls and maintains a constant preset reduced downstream pressure regardless of changes in downstream demand or upstream pressure. Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request. Connexion Pressure relief valve is installed on the outlet side of the water supply pipeline or in the by-pass of the pipework to be protected. It can maintain safe water supply pressure inside the pipe and protects against the excess of pressure in the installation. Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request.
Connexion Pressure Sustaing Valve controls and maintains a preset upstream pressure, regardless of changes in downstream demand. Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request.  Connexion 2/2 Solenoid control valve, which can substitute traditional gate valves, ball valve and butterfly valves. The function is easily controlled by electrical power 2 port 2 position ON/OFF control of most liquids and Gases up to 200 Centigrade from 0.3 to 16 Bar in most voltages. Voltage: AC 24/48//110/230/380v 50/60Hz DC 12/24/48/110/220v Optional ATEX EExmIIT4, EexdIICT6 Standard Sizes 2" DN50 to 14" DN350mm, larger sizes upon request. Connexion Threaded range of all 316 Stainless Steel Pressure Reducing suitable for Fluid, Air, Gas or Steam. Strong Piston design for long life and agressive applications with high acuracy and fast response. Pressure Adjusting Range : 1 to 6 Bar 4 to 10 Bar 8 to 13 Bar Sizes 1/2 to 2" BSP / NPT Connexion Flanged Port Cast Iron Pressure Redcung Valve suitable for most general media applications. Other materials available on request, Pressure Adjusting Range 0.5 to 5 Bar 3 to 8 Bar Test Pressure 21 Bar Sizes 2" DN50 to 4" DN100 Connexion Full Flow silent check valve is applied on lift pipe or fluid pipe with pressure. The valve will operate against back floe will close at suitable speed when a pump is shut down to separate the inertia fluid (positive pressure) from the back flow (negative pressure) caused by power turned off and ,hence, prevent the noise caused by the impact of positive and negative pressure. The silent check valve plays an important role on piping , especially applied on the outlet of the pump. Sizes : 2" DN50 to 12" DN300 Materials Cast Iron, Ductile Iron, 316 Stainless steel and Bronze. Connexion Direct Acting ALL 316 Stainless Steel Threaded Pressure Sustaining and Back Pressure Valve is suitable for the fluid of pure water, acid & alkaline fluid, steam or air. Back pressure valve can maintain required pipeline pressure and flow, and also release over high pressure. Design of piston and diaphragm improves the inability of sustaining pressure and leakage. Back pressure chamber controls the valve gate and let gate respond, quickly and adjust pressure accurately. Pressure Adjusting Range : 1 to 5 Bar 4 to 10 Bar 8 to 13 Bar Applied Temperature : -15C to +210C Valve Body Testing Pressure : 21 Bar Pressure gauge medicates the sustaining pressure.
|
